I need to replace the shafts in my woods as they are to stiff. I have changed many steel shafts over the years but never a Graphite one. I live in a part of France where there are no club repairers and therefore need to do this myself. Any expert advice on this welcome.

Its not that difficult – I managed it!   The trickiest bit is removing the old graphite shaft if you want to reuse it –especially if you don’t have a shaft puller.  DON’T TWIST IT!   If you don’t want to reuse the shaft just cut it off close to the hosel and drill out the stump.   

Lots of useful video clips here golfsmith.com

Thanks guys I get onto Googe now and get an extractor.